Networking & Wifi Hardware

The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of wtih 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM.

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices).

A simple solution to wireless

Optical modules complying with SFP (Small Form-factor Pluggable) standard are devices converting electrical signal to the optical form and optical signal to the electrical form. Usage media converters with the ability to exchange SFP modules is particularly preferred because of its versatility, for example if you change the network configuration rather than replace the entire unit or add new media converters simply select the appropriate SFP module.

The PFT1300 allows to increase the distance of PoE supply and data sending via UTP category 5e up to max. 200 m. The cascade connection of 2 extenders allows to send the data and power up to 300m.

Use your existing electrical wiring to extend your Internet access to any room in your house. Just plug the Tenda PH6 Gigabit Passthrough Powerline Adapter Kit - 1000Mbps into any electrical outlet then plug in your new network connection.

4Port POE switch suitable for IP cameras with up to 30Watts power requirements

The PFT1200 60W High PoE Midspan from Dahua Technology can support devices with up to 60W of PoE. It is compatible with the Dahua PFT1300 PoE Extender (available separately) and supports cascading with Level 2 PoE. With separately available hardware, you can connect up to three network cameras (8W each) with a maximum operating range of 984'.

PFS3006-4ET-60 is a 4-port fast ethernet switch, which supports 250 meters long distance PoE transmission.

Refurbished or Customer returned as unwanted. Full functioning with full warranty. Item may show signs of use with some cosmetic minor marks and or original packaging missing.

The LR1002-1ET and the LR1002-1EC Single-port EoC Extenders serves two purposes: first it converts between a PoE signal and Dahau's innovative Enhanced Power over Ethernet technology. Second, the extenders convert signals between coaxial cable and CAT5E/CAT6 Ethernet cable.

The LR1002-1ET and the LR1002-1EC Single-port EoC Extenders serves two purposes: first it converts between a PoE signal and Dahau's innovative Enhanced Power over Ethernet technology. Second, the extenders convert signals between coaxial cable and CAT5E/CAT6 Ethernet cable. These extenders allow non ePoE-enabled devices to take advantage of the long transmission distances that ePoE technology delivers.